cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
163
Views
0
Helpful
0
Replies

SIP Hook Enable Cisco

simogrimo94
Level 1
Level 1

Hi All

I have a problem with Cisco 7821 and Plantronics headset.

7821 are SIP 

I have a CME 

I need to configure hookswitch control for theese phones and this is the only thing i found:

  • Make sure the phone F/W is 8.3(3)x or higher.
  • Access to CUCME via the router’s command line interface and use the following commands to enable EHS feature for the phone.
    • Device-Name (config)# telephony-service
    • Device-Name (config-telephony)# service phone ehookEnable 1
    • Device-Name (config-telephony)# create cnf-files
  • Reset the phone.

Unfortunately this is for SCCP only and not for SIP ones.

Does anyone have a fix for this?

Many thanks 

SImone

0 Replies 0