Hi All
I have a problem with Cisco 7821 and Plantronics headset.
7821 are SIP
I have a CME
I need to configure hookswitch control for theese phones and this is the only thing i found:
- Make sure the phone F/W is 8.3(3)x or higher.
- Access to CUCME via the router’s command line interface and use the following commands to enable EHS feature for the phone.
- Device-Name (config)# telephony-service
- Device-Name (config-telephony)# service phone ehookEnable 1
- Device-Name (config-telephony)# create cnf-files
- Reset the phone.
Unfortunately this is for SCCP only and not for SIP ones.
Does anyone have a fix for this?
Many thanks
SImone
