cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
705
Views
0
Helpful
2
Replies

SIP is registering but No audio

Ejaz Ahmed
Level 1
Level 1

Hi Experts,

I have a Cisco ASA 5510 running 8.4(5) software version and my asterisk server is placed in the DMZ. The asterisk server is NATed with a public IP and forwarded the SIP port 5060(tcp/udp) and RTP 10000 - 20000 (tcp/udp) to the server. I can register the phone and make calls using public IP (of asterisk server) but can't here anything.

Is there any other ports needs to be opened?

 

Regards,

Ejaz

 

2 Replies 2

Hi,

can you see on the ASA any blocks / Drops?

Perhaps the RTP Port Range is another, than 10000 - 20000. For instance, Cisco uses UDP 16384 - 32767.

Regards,

DrM

This discussion has been reposted from Hall of Fame to the IP Telephony community.

Getting Started

Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: