cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
392
Views
0
Helpful
7
Replies

SIP Outbound calls

G3261
Level 4
Level 4

I am  having problems with SIP trunks and outbound call from one specific shared line. when in SRST, if I dial any number from this shared line (0100) I get fast busy!!! Below is fallback mode configuration. Do you see anything wrong with this? Having same number 0100 as call-forward busy can create any issues?

call-manager-fallback
 secondary-dialtone 9
 max-conferences 8 gain -6
 transfer-system full-consult
 limit-dn 79xx 2
 limit-dn 79xx 2
 limit-dn 79xx 2
 limit-dn 79xx 2
 ip source-address 192.168.XXX.XXX port 2000
 max-ephones 75
 max-dn 75
 system message primary Fallback Mode
 no huntstop
 pickup 0100
 call-forward busy 0100
 time-zone 10
 time-format 24
 date-format dd-mm-yy
!

7 Replies 7

Aseem Anand
Cisco Employee
Cisco Employee