SIP Phone Dialing

[mightyking]

Hello Everyone,

We have migrated some SCCP phones to SIP for testing. Some of our management people don't like the sound (bib, bib, bib) of rediling a number with SIP Phones. 

• SCCP --> Digit-by-Digit
• SIP --> Enbloc (phone dials one by one)

We did not have that sounding with SCCP phones. Is ther a way we can dial a number in silence?

Thanks,

MK

[Hamzeh Alzubi]

Hello,

  If you mean to let SIP phone send digits in one shot for enbloc instead of one by one,  you can assign SIP dial rules to them:

http://www.cisco.com/c/en/us/td/docs/voice_ip_comm/cucm/admin/8_6_1/ccmcfg/bccm-861-cm/b03sdial.html

HTH

Hamzeh

[mightyking]

Hi Hamzeh,

Thank you for taking the time and replying.

I don't seem to be able to configure a dialing rule which will allow to send the digits enbloc. Could you please send me a sample configuration?

Thanks,

MK

[mightyking]

Anybody with any idea?

Thanks,

MK

[Dennis Mink]

What phones are you using? 

Also just try a dummy dial rule like 87654321 and add that it. See if that makes a difference.

[mightyking]

 Dennis,

I created the attached rule and applied on one of the test phones, nothing changed. The phone still dials digit by digit with a bip btw digits. For a local 10 digits dialing, we hear 10 bips which is annoying.

We are using almost every type of Cisco IP Phones, starting from 6921 to 7975.

Thank,

MK