Hello everyone, i've asked this question many times during my calls with Cisco Support, but no one was able to give me an answer.
I set up about 100 SIP phones, they are 8961 phones and all of the are working, paging has been set up as well and it works also. However if i am on the phone paging cuts right through the conversation and it is very annoying to say the least,
Can any one assist please
This is what i have for paging
ephone-dn 5 number 200 no-reg primary description IP-Paging name Paging All Phones paging ip 22.214.171.124 port 20480
We are upgrading our UCM cluster from 10.5 to 12.5 what is the preferred method of license manager (Cisco Smart Software Manager) considering the security risksDirect could accessDirect cloud access through and HTTPs proxy -Mediated access through a...
1. IntroductionThe purpose of this document is to consolidate the list of deprecated Cisco IP Phone Models in different versions of Cisco Unified Communications Manager.2. RequirementsBasic knowledge of a Cisco Unified Communications ManagerBasic knowledg...
Message to visitors: this document is work in progress, will update in the coming weeks several times!
MPP 6800 series - DECT Deployment Guide
DECT stands for Digital Enhanced Cordless Telecommunications and is a standard for wireless voice services in bu...
This document describes how to collect CUCM devices reports from using the Command Line Interface (CLI) of the server's operating system (OS).
Contributed by Christian Nuche (cnuche), Cisco DSM Designated Services Manager - Hig...
This document describes how to collect Jabber reports from IM&P and CUCM servers using the Command Line Interface (CLI) of the server's operating system (OS).
Contributed by Christian Nuche (cnuche), Cisco DSM Designated Servic...