Hi, I have a customer who ha the following set-up:
SIP AS5350 VG with SIP trunk to SBC and ISDN Pri to the ISDN.
The problem they have is that their SP is expecting a 'user verified and passed' q931 message but the VG is sending 'user provided not screened'
They have asked if there is a way to change the config to give the correct the message/ modify the 3a octet?
Many thanks, John.
Info from the customer:
Please provide clarification on this point. SIP is common protocol where there are many CLI enhancements proposed in IETF forums. In Cisco VoIP Gateway, which parameter of SIP Header can be mapped to screening indicate in Q.931
Table of Contents:
1. Reference URLs
2. Type of Certificates
3. Regenerate certificates that have no CTL/ITL impact [no phone impact]
4. Regenerate certificates that have CTL/ITL impact [medium phone impact]
5. Step to delete expired certif...
I have been using the recent release of the WebEx Desktop App (39.9) which has Wireless Sharing feature. Prior to this, we were using the proximity application for sharing, where we can find the performance logs on the %temp% folder of the client machine....
Cisco Recommends Dual NIC deployment for Expressways. But single NIC deployment can be achieved. Points to be noted for single NIC: > Firewall must support NAT Reflection, if not then you can use dual NATing to achieve NAT reflection on unsup...
Learn how Cisco is transforming how you communicate in the modern workplace with new capabilities like expanded Webex calling, unified app experiences, and intelligent devices and tools.
Webex Unified Platform
Deep Dive Briefings