cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
1013
Views
0
Helpful
1
Replies

SIP Trunk Duration x Time up

Andre Castro
Level 1
Level 1

Dear colleagues,

 

I'm currently monitoring 2 sip trunks between 2 clusters. Both have sip options enabled.

If I list all sip trunks going to Device > Trunk, CUCM gets me Full Service and Time in Full Service of over 10 days.

However, if I go into any of the sip trunk configuration, I see Status 'up' and Duration 'Time up: 0 days and 14 hours' in CUCM1 and 0 days and 21 hours in CUCM2.

 

Why do we get this discrepancy? What do they actually mean?

 

Thank you in advance.

Regards,

 

Ander

1 Reply 1

racostar
Cisco Employee
Cisco Employee

Hello,

For the ones having this issue on CUCM, there is a known Bug CSCuj19006.

This is a cosmetic issue affecting all versions starting from CUCM 10, where this feature was added.

Refer to below webpage to see more details about it :

https://bst.cloudapps.cisco.com/bugsearch/bug/CSCuj19006/