12-27-2017 02:29 AM - edited 03-17-2019 11:51 AM
Dear Team,
I have a sip trunk between cisco UCM to Huwaei escape PABX,sip trunk between cisco to huwaei is up and call are going,but i am facing one way voice issue,98% calls i an facing the same audio issue.
Huwaei extension can hear my voice from cisco phone,but i cant hear voice from huwaei extension.
Any one please reply
Solved! Go to Solution.
12-27-2017 02:52 AM
The Cisco CallManager logs are needed: How to Collect Traces for CUCM 9.x, 10.x and 11.x
12-27-2017 02:40 AM
Is there a firewall between Cisco IP Phones (or CUCM) and the Huawei PBX? Can you attach SDL logs from CUCM for a specific call?
12-27-2017 02:42 AM
12-27-2017 02:52 AM
The Cisco CallManager logs are needed: How to Collect Traces for CUCM 9.x, 10.x and 11.x
12-27-2017 03:06 AM
12-27-2017 03:06 AM
12-27-2017 03:19 AM
First make a call and then gather CallManager logs for the last xx minutes.
12-27-2017 03:32 AM
12-27-2017 03:25 AM
12-27-2017 04:06 AM
12-27-2017 10:08 AM
Hello bro!, are you using a CUBE? it´s just that i see the following
CUCM 10.222.0.11
IP Phone 10.222.0.115
direct INVITE to "213.34.194.102"
Regards
Alexis
12-28-2017 04:22 AM
01-04-2018 12:01 AM
Please try to enable MTP (Media Termination Point) checkbox in Trunk Configuration settings on CUCM. This helped me.
Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: