Hi All,
Can anybody help with setting up SIP trunking for Draytel (www.draytel.org) on UC540? The draytel website recommends the following settings:
Registrar: draytel.org
Outgoing Proxy : nat.draytel.org:5065
I have edited an XML template and have imported into the SIP trunk configuration using CCA 3.0.
I can make outgoing calls, but cannot receive calls
Checking SIP Trunk Status in Diagnostics shows that the line is not registered:
----------- show sip-ua register status -----------
Line peer expires(sec) registered P-Associ-URI
================================ ========== ============ ========== ============
0208******* 20007 41 no
8****** -1 2322 yes
----------- End CLI Output -----------
I have set the WAN port behind a Netgear router, however I have set the WAN port as a DMZ Host so all in bound trafic should hit the UC540 WAN port.
My question is really whether I need to set an inbound Cisco firewall route for 5065 and if so to which internal address? Also does a NAT entry have to be made for thr 5065 port on the UC540?
The xml file that I have set up has the following settings (has the 5065 port entry been enetred in the right place?):
<?xml version="1.0" encoding="UTF-8" standalone="yes"?>
<ns1:SIPProviderTemplate xmlns:ns1="SIPProviderXMLSchema">
<ProviderName>DrayTel</ProviderName>
<Revision>1</Revision>
<Locale>United Kingdom</Locale>
<Fields>
<FieldInfo>
<FieldName>Proxy Server</FieldName>
<isDisplayed>true</isDisplayed>
<isRequired>true</isRequired>
</FieldInfo>
<FieldInfo>
<FieldName>Secondary Proxy Server</FieldName>
<isDisplayed>false</isDisplayed>
<isRequired>false</isRequired>
</FieldInfo>
<FieldInfo>
<FieldName>Registrar Server</FieldName>
<isDisplayed>true</isDisplayed>
<isRequired>true</isRequired>
</FieldInfo>
<FieldInfo>
<FieldName>Outbound Proxy Server</FieldName>
<isDisplayed>true</isDisplayed>
<isRequired>false</isRequired>
</FieldInfo>
<FieldInfo>
<FieldName>SIP Domain Name</FieldName>
<isDisplayed>true</isDisplayed>
<isRequired>true</isRequired>
</FieldInfo>
<FieldInfo>
<FieldName>Digest Authentication</FieldName>
<isDisplayed>true</isDisplayed>
<isRequired>true</isRequired>
</FieldInfo>
<FieldInfo>
<FieldName>User Credentials</FieldName>
<isDisplayed>true</isDisplayed>
<isRequired>false</isRequired>
</FieldInfo>
<FieldInfo>
<FieldName>Call Admission Controls</FieldName>
<isDisplayed>false</isDisplayed>
<isRequired>false</isRequired>
</FieldInfo>
<FieldInfo>
<FieldName>Company Name</FieldName>
<isDisplayed>true</isDisplayed>
<isRequired>false</isRequired>
</FieldInfo>
</Fields>
<CredentialsRealm>Proxy Server</CredentialsRealm>
<VoiceCodecPreference>
<VoiceCodec>
<VoiceCodecType>G711ulaw</VoiceCodecType>
<Preference>1</Preference>
</VoiceCodec>
</VoiceCodecPreference>
<FaxProtocol>Upspeed G711</FaxProtocol>
<DTMFMethod>RFC 2833</DTMFMethod>
<RTPPayloadType>101</RTPPayloadType>
<DSCPSignaling>cs3</DSCPSignaling>
<DSCPMedia>ef</DSCPMedia>
<isHairpinCallTransfers>true</isHairpinCallTransfers>
<isHairpinCallForwards>true</isHairpinCallForwards>
<isPreserveCallerIDs>false</isPreserveCallerIDs>
<Transport>udp</Transport>
<SessionPort>Fixed</SessionPort>
<DestinationPort>5065</DestinationPort>
<RegistrarExpiry>3600</RegistrarExpiry>
<isRegisterAllDIDs>true</isRegisterAllDIDs>
<isSamePasswordForAllDIDs>true</isSamePasswordForAllDIDs>
<ProvisionalACK>Disable</ProvisionalACK>
<RetriesInvite>2</RetriesInvite>
<RetriesRegister>10</RetriesRegister>
<TimersConnect>100</TimersConnect>
<isRemotePartyIDs>false</isRemotePartyIDs>
<SupplementaryCommands>
<SupplementaryCommand>
<SubMode>sip-ua</SubMode>
<Command/>
<Processing>Pre</Processing>
</SupplementaryCommand>
</SupplementaryCommands>
</ns1:SIPProviderTemplate>
Any guidance would be most appreciated as I am starting to tear my hair out on this one.
Many thanks
