cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
Announcements

207
Views
0
Helpful
4
Replies
Beginner

SIP Trunks between CME and Panasonic NS 700

Hi Everyone

 

We want to integrate the Cisco CME with the Panasonic NS 700 PBX over Private SIP Trunks. We have the following licence enabled on the Voice Router. Please if someone can tell me if we are ok for the SIP Trunk configuration or we need to buy some licences for this.

 

Thanks in advance

 

Core#show license detail
Index: 1 Feature: AdvUCSuiteK9 Version: 1.0
License Type: Permanent
License State: Active, Not in Use
License Count: Non-Counted
License Priority: Medium
Store Index: 5
Store Name: Primary License Storage
Index: 2 Feature: AdvUCSuiteK9 Version: 1.0
License Type: EvalRightToUse
License State: Inactive
Evaluation total period: 8 weeks 4 days
Evaluation period left: 8 weeks 4 days
Period used: 0 minute 0 second
License Count: Non-Counted
License Priority: None
Store Index: 4
Store Name: Built-In License Storage
Index: 3 Feature: FoundationSuiteK9 Version: 1.0
License Type: Permanent
License State: Active, Not in Use
License Count: Non-Counted
License Priority: Medium
Store Index: 2
--More-- Store Name: Primary License Storage
Index: 4 Feature: FoundationSuiteK9 Version: 1.0
License Type: EvalRightToUse
License State: Inactive
Evaluation total period: 8 weeks 4 days
Evaluation period left: 8 weeks 4 days
Period used: 0 minute 0 second
License Count: Non-Counted
License Priority: None
Store Index: 3
Store Name: Built-In License Storage
Index: 5 Feature: appxk9 Version: 1.0
License Type: Permanent
License State: Active, In Use
License Count: Non-Counted
License Priority: Medium
Store Index: 4
Store Name: Primary License Storage
Index: 6 Feature: appxk9 Version: 1.0
License Type: EvalRightToUse
License State: Inactive
Evaluation total period: 8 weeks 4 days
Evaluation period left: 8 weeks 4 days
--More-- Period used: 0 minute 0 second
License Count: Non-Counted
License Priority: None
Store Index: 0
Store Name: Built-In License Storage
Index: 7 Feature: cme-srst Version: 1.0
License Type: EvalRightToUse
License State: Active, In Use
Evaluation total period: 8 weeks 4 days
Evaluation period left: 8 weeks 3 days
Period used: 19 hours 6 minutes
Transition date: Jun 23 2019 17:46:18
License Count: 475/0 (In-use/Violation)
License Priority: Low
Store Index: 5
Store Name: Built-In License Storage
Index: 8 Feature: hseck9 Version: 1.0
License Type: Permanent
License State: Active, In Use
License Count: Non-Counted
License Priority: Medium
Store Index: 1
Store Name: Primary License Storage
--More-- Index: 9 Feature: ipbasek9 Version: 1.0
License Type: Permanent
License State: Active, In Use
License Count: Non-Counted
License Priority: Medium
Store Index: 0
Store Name: Primary License Storage
Index: 10Feature: securityk9 Version: 1.0
License Type: Permanent
License State: Active, In Use
License Count: Non-Counted
License Priority: Medium
Store Index: 3
Store Name: Primary License Storage
Index: 11Feature: securityk9 Version: 1.0
License Type: EvalRightToUse
License State: Inactive
Evaluation total period: 8 weeks 4 days
Evaluation period left: 8 weeks 4 days
Period used: 0 minute 0 second
License Count: Non-Counted
License Priority: None
Store Index: 2
--More-- Store Name: Built-In License Storage
Index: 12Feature: throughput Version: 1.0
License Type: EvalRightToUse
License State: Active, Not in Use, EULA not accepted
Evaluation total period: 8 weeks 4 days
Evaluation period left: 8 weeks 4 days
Period used: 0 minute 0 second
License Count: Non-Counted
License Priority: None
Store Index: 6
Store Name: Built-In License Storage
Index: 13Feature: uck9 Version: 1.0
License Type: Permanent
License State: Active, In Use
License Count: Non-Counted
License Priority: Medium
Store Index: 6
Store Name: Primary License Storage
Index: 14Feature: uck9 Version: 1.0
License Type: EvalRightToUse
License State: Inactive
Evaluation total period: 8 weeks 4 days
Evaluation period left: 8 weeks 4 days
--More-- Period used: 0 minute 0 second
License Count: Non-Counted
License Priority: None
Store Index: 1
Store Name: Built-In License Storage

4 REPLIES 4

Re: SIP Trunks between CME and Panasonic NS 700

Hello,

If I understand correct your question, you aim to connect the CME with the Panasonic, in order to phones registered on the CME to able to call phones registered to the Panasonic, via a SIP trunk ("internal" call routing within your LAN).

If this is the case, then you should NOT have a problem with the licensing.

George

Please always Rate Helpful Posts and/or Mark Solutions as Accepted
Beginner

Re: SIP Trunks between CME and Panasonic NS 700

Thanks George

 

That is correct.

 

Please if you can tell what licences will be required to setup the SIP Trunks on CME.

 

Regards

 

Rav.

Highlighted
Frequent Contributor

Re: SIP Trunks between CME and Panasonic NS 700

If the trunk is not authenticated, then just create a dial-peer like this:

!
voice class codec 1
codec preference 1 g711ulaw
codec preference 2 g711alaw
codec preference 3 g729r8
!
!
dial-peer voice 202 voip
description *** Outbound to Panasonic ***
destination-pattern 4..
session protocol sipv2
session target ipv4:X.X.X.X
voice-class codec 1
dtmf-relay rtp-nte
!

IP X.X.X.X is the IP from the Panasonic

and 4.. are the extensions on the Panasonic, example of course

Check the codec, this depends on what the Panasonic supports

 

JH

Re: SIP Trunks between CME and Panasonic NS 700

Hello Ravs,

 

There was a typo, I meant you shouldn' t have a problem and you can just use a dial-peer configuration (make sure that you use the correct codec)

 

I will correct my above answer,

George

Please always Rate Helpful Posts and/or Mark Solutions as Accepted
CreatePlease to create content
Content for Community-Ad
August's Community Spotlight Awards