Small Gateway to use with UCM

[hauchinango]

I have a UCM 11.x.  I need to put a voice gateway at a small remote site with a single POTS line.

Is a 1921 the smallest option or is there anything less expensive that will provide an FXO port?  

Thanks

[R0g22 · Accepted solution]

Just a single POTS line ?? You can look into 800 series routers -
https://www.cisco.com/c/en/us/products/routers/800-series-routers/index.html#~stickynav=1

[Mohammed al Baqari]

1900 doesn't support voice gateway. As mentioned look for 800 series. This
is the minimum