10-23-2009 06:58 AM - edited 03-18-2019 10:46 AM
Dear all,
I am using CCM 6.1. and In my network we are using third party NMS( Tivoli).
I want to send the traps for IP Phones to that NMS.
For that what I should configure in my CCM.
Ip attaching, what I have done for SNMP configuration in my CCM.
any body is there to help me out.
Thanks & regards
Madhab
10-26-2009 07:58 AM
You have to enable clogNotificationsEnabled (1.3.6.1.4.1.9.9.41.1.1.2) and then the traps will be sent to their destination as defined.
Joe
10-27-2009 08:07 AM
Dear Joe,
Thanks for your reply.
can you tell me from which option I can enable that ClogNotification .
thanks & regards
madhab
10-28-2009 06:38 AM
Hi Madhab,
For any dos prompt:
To enable trap (clogNotificationsEnabled) : snmpset -c public -v 2c
To change the trap severity (clogMaxSeverity) : snmpset -c public -v 2c
In above example last value 4 means set the severity to 4 (Error). In this example any syslog event with severity emergency(1),alert(2),critical(3),error(4) will generate the syslog trap.
Joe
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide