Softkey template for CME 8.6

[srosenthal]

I am trying to setup a softkey template for my 8945 phones which are connected via a CME 8.6.  Here is what I have:

ephone-template  2

softkeys idle  Login Newcall Redial

softkeys seized  Redial Endcall Cfwdall Gpickup Callback

softkeys connected  Hold Endcall Trnsfer Confrn Park Acct

I have applied this template under the ephone but the Login button never displays.  I am using extension mobility and I wanted the Login button to be on the screen when the phone is idle so the user will not have to press the * then 6 to get the login screen.

Seth

[Chris Deren]

89XX phone use "Feature policy soft key control" as you can see here:

http://www.cisco.com/en/US/docs/voice_ip_comm/cucme/admin/configuration/guide/cmesoftk.html

HtH,

Chris

[srosenthal]

The "Feature policy softkey control" seems to apply to SIP phones and I have these phones setup for SCCP. 

Am I reading this wrong?

Seth