cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
Announcements
847
Views
4
Helpful
7
Replies
midhun_km
Beginner

SPA 500 AND SPA 300 SERIES IP PHONES

Dear all,

Good Monring....

Is it possible to SPA 500 AND SPA 300 SERIES IP PHONES to CUCM......?

or these phone made for only CCM Busuiness Edition Only....?

Goooood Day...

Regards,

Midhun Kunnukattil Madhu

2 ACCEPTED SOLUTIONS

Accepted Solutions
ronpatel
Collaborator

Hi

Natively SPA500 and 300 are not supported in CUCM.

These phones supports standard SIP and SPCP (Tokenized Skinny), not SCCP.

So you can add them as third party SIP phone in CUCM.

But note these are still not tested to work with Cisco CUCM.

Regards

Ronak patel

Regards Ronak Patel Rate all helpful post by clicking stars below the answer.

View solution in original post

Please rate post if it was helpful....

Cheers

Ronak patel

Regards Ronak Patel Rate all helpful post by clicking stars below the answer.

View solution in original post

7 REPLIES 7
ronpatel
Collaborator

Hi

Natively SPA500 and 300 are not supported in CUCM.

These phones supports standard SIP and SPCP (Tokenized Skinny), not SCCP.

So you can add them as third party SIP phone in CUCM.

But note these are still not tested to work with Cisco CUCM.

Regards

Ronak patel

Regards Ronak Patel Rate all helpful post by clicking stars below the answer.

Hi Ronak,

Is there any .cop.sgn device enabler available for these phone to directly adding to CUICM....???

Regards,

Midhun KM

Unfortunately no, You can not add these phone natively to cisco CUCM. 

Regards Ronak Patel Rate all helpful post by clicking stars below the answer.

Thanks...... RP....!!!!!!!!!!

Please rate post if it was helpful....

Cheers

Ronak patel

Regards Ronak Patel Rate all helpful post by clicking stars below the answer.

hi Team,

Help me to check  if this SAP 301 model can add to CUCM version 4.2  as third party SIP phone?

Appreciate the Reply ASAP.

Regards,

May

Hi

These phones are not tested to work with CUCM 4. But you may follow normal procedure to add third party phone and see if it works.

I do not have CUCM 4.2 to test it.

Regards

Ronak Patel

Rate helpful posts.

Regards Ronak Patel Rate all helpful post by clicking stars below the answer.
Create
Recognize Your Peers
Content for Community-Ad