SPA 500 AND SPA 300 SERIES IP PHONES

[midhun_km]

Dear all,

Good Monring....

Is it possible to SPA 500 AND SPA 300 SERIES IP PHONES to CUCM......?

or these phone made for only CCM Busuiness Edition Only....?

Goooood Day...

Regards,

Midhun Kunnukattil Madhu

[ronpatel · Accepted solution]

Hi

Natively SPA500 and 300 are not supported in CUCM.

These phones supports standard SIP and SPCP (Tokenized Skinny), not SCCP.

So you can add them as third party SIP phone in CUCM.

But note these are still not tested to work with Cisco CUCM.

Regards

Ronak patel

[midhun_km]

Hi Ronak,

Is there any .cop.sgn device enabler available for these phone to directly adding to CUICM....???

Regards,

Midhun KM

[ronpatel]

Unfortunately no, You can not add these phone natively to cisco CUCM. 

[midhun_km]

Thanks...... RP....!!!!!!!!!!

[ronpatel · Accepted solution]

Please rate post if it was helpful....

Cheers

Ronak patel

[may.thu]

hi Team,

Help me to check  if this SAP 301 model can add to CUCM version 4.2  as third party SIP phone?

Appreciate the Reply ASAP.

Regards,

May

[ronpatel]

Hi

These phones are not tested to work with CUCM 4. But you may follow normal procedure to add third party phone and see if it works.

I do not have CUCM 4.2 to test it.

Regards

Ronak Patel

Rate helpful posts.