SPA phone models supported with cucm 12?

[baselzind]

please can someone tell me if the below phone models are supported with cucm 12?

SPA 508G
SPA 502g
SPA 504G
SPA 525G

[HARIS_HUSSAIN]

1) SPA Phone are not naively supported by CUCM. Although we can add them as Third Party SIP Phone to avail basic functionalities like any third party device. Same is true for CUCM 12 as well.

Below might Help

https://community.cisco.com/t5/ip-telephony-and-phones/cisco-spa-500-series-phones-as-sip-endpoints-in-cucm/td-p/1564619 

**DON'T FORGET TO RATE & ACCEPT SOLUTION IF APPLICABLE.

[baselzind]

is there any guide on how to configure SPA phones as a sip device on cucm ?

[HARIS_HUSSAIN]

Below Guide Should Help See the PDF Attachment in post. Although it is for SPA112 Adapter but many steps will be similar.
https://community.cisco.com/t5/small-business-support-documents/configuring-spa112-with-cucm/ta-p/3146702?attachment-id=78547

[baselzind]

please is there anyone with hand on experience of registering SPA 5xx phones into cucm?

[baselzind]

please anyone?

[HARIS_HUSSAIN]

Have you followed the above guide. What issue are you facing now.

[baselzind]

Thx for checking , I still haven’t reached the point of registering them but i wanted someone who have hands on experience registering them