cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
Announcements
Walkthrough Wednesdays
892
Views
0
Helpful
0
Replies
alig.norbert
Enthusiast

SPA2102 call transfer with CME?

Hi there

I have a CME (Version 7.1, 12.4(24)T6) in my lab and I'm trying to do a call transfer (consult) on an analog phone connected to a SPA2102.

Calling in/out from the analog phone ist working but the flash function (with *98) won't work. I can't hear a second dial-done.

Who can share me a setup with the call transfer functionality?

Thanks,

Norbert

Attached the setp from the SPA2102 (line1)

Here the CME setup (analog phone has nr. 132):

voice register global

mode cme

source-address 192.168.xx.xx port 5060

max-dn 192

max-pool 58

time-format 24

hold-alert

call-forward system redirecting-expanded

!

voice register dn  132

number 132

name number-132

label number-132

!

voice register pool  1

id mac 0000.0000.0000

number 1 dn 132

dtmf-relay rtp-nte cisco-rtp sip-notify

username 132 password xxxxx

codec g711ulaw

no vad

Here the show voice register:

VOICE REGISTER POOL

===================

Pool Tag 1

Config:

  Mac address is 0000.0000.0000

  Number list 1 : DN 132

  Proxy Ip address is 0.0.0.0

  DTMF Relay is enabled, rtp-nte, cisco-rtp, sip-notify

  Call Waiting is enabled

  DnD is disabled

  Busy trigger per button value is 0

  keep-conference is enabled

  username 132 password xxxxx

  Transport type is udp

  service-control mechanism is not supported

  registration Call ID is d670c8a0-9ca0288@192.168.xx.xx

  Privacy feature is not configured.

  Privacy button is disabled

  active primary line is: 132

Dialpeers created:

dial-peer voice 40001 voip

destination-pattern 132

session target ipv4:192.168.xx.xx:5060

session protocol sipv2

dtmf-relay rtp-nte cisco-rtp sip-notify

codec  g711ulaw bytes 160

no vad

  after-hours-exempt   FALSE

0 REPLIES 0
Content for Community-Ad

Spotlight Awards 2021