cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
888
Views
0
Helpful
1
Replies

SPA502 with CCM 7.0

dsobrinho
Level 9
Level 9

Hey guys,

Does anybody knows if is possible register SIP device SPA502 with Cisco Unified Callmanager 7.0?

If yes, does anybody knows if all features like (transfer, conference, hold) works?

Best regards

Daniel

Daniel Sobrinho
1 Reply 1

dsobrinho
Level 9
Level 9

To conclude

I got to register.  You need add license for Thirdy-Part SIP:

Following the steps:

- License Thirdy Party Sip devices or use available license.

- SPA502 or SPA525 (Linksys SIP IP Phone)

- To SPA502 (create a Basic SIP Device) will be used only 3 DLUs

- To SPA525 (create a Advanced SIP Device) will be used 6 DLUs

- Added a DN

- applied a User ID with a Digest credential and password

SPA502/525, this device are manageable by web browser. All device configuration must be done on this manageable interface.

- apply the same config on the device

- Digest ID

- DN

save

The device should register and will be available to calls.

best regards,

Daniel

Daniel Sobrinho
Getting Started

Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: