cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
Announcements
111
Views
0
Helpful
5
Replies
shyam2014
Beginner

Speed dial configs

I have a speed dial to configure like below.

If they dial 123 it will ring 00123456789 number in PSTN and there is a route pattern created for 
00[1-8]XXXXXXXX

Hence I have created a route pattern 123 with called party transformation as 00123456789 but whenever we are dialling 123 the call is not going out to GW.

In CDR it looks like it is not loading the partition for the called Party number.

Any ideas?

5 REPLIES 5
Jaime Valencia
Hall of Fame Cisco Employee

I'd start by simply checking all the CSS and partitions of all elements involved, if the call is not making it to the GW, then the issue is clearly in CUCM.

HTH

java

if this helps, please rate

Hi Jaime,

I checked that the partition that I put on this route pattern is already included on calling search space from which extension is being called.

What other option do I have to set it up in GW?

Jaime Valencia
Hall of Fame Cisco Employee

You have to to nothing on the GW, if you dial that 001 whatever number from an IP phone, does it work??

If it does, then you somehow misconfigured the TP.

HTH

java

if this helps, please rate

Used DNA and found that I created a TP with that number which should have been deleted before to the newly created RP to work. Hence deleted the TP and it started working.

shh5455
Participant

Try running Dynamic Number Analyzer

 

https://<cucm>/dna

 

You may have to activate the service first.

Create
Recognize Your Peers
Content for Community-Ad