cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
753
Views
0
Helpful
2
Replies

Speed Dial on 8831 with a pause

Ed Kender
Beginner
Beginner

Good Morning - we are running CUCM 10.5.2 with 8831 conference phones.  We have been requested to add a speed dial with a couple of pauses and then a 6 digit code.  This works fine from a 7975 SCCP but not from the 8831 SIP as I believe this is sending ENBLOC VS digit by digit.  IS there a workaround for this with SIP devices?  I tried to disable ENBLOC on the SIP device but did not help.

2 REPLIES 2

Manish Gogna
Cisco Employee
Cisco Employee

Hi Ed,

This is not available on 8831 as of now. Interestingly it works for other 88XX models like 8811, 8841, 8851, 8851NR, and 8861 as per the user guide

http://www.cisco.com/c/en/us/td/docs/voice_ip_comm/cuipph/8811_8841_8851_8861/10_5/english/userguide/P881_BK_C9A41445_00_cisco-ip-phone-8811-8841/advanced_calling_features.html#CUIP_RF_PB885239_00

Not for 8831

http://www.cisco.com/c/en/us/td/docs/voice_ip_comm/cuipph/8831/10_3_1/english/UserGuide/CS38_BK_U841D454_00_userguide-8831/CS38_BK_U841D454_00_userguide-8831_chapter_0101.html

You may check with TAC for any enhancement requests that may be open for the same.

Manish

Hi,

I know this is an old thread now, but do you know speed dial with pause is supported on an 8861 connected via Mobile Remote Access?

Thanks

Manny

Getting Started

Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: