cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
719
Views
0
Helpful
1
Replies

Speed Dials

komputerguy
Level 1
Level 1

How do users use the speeds dials they setup through the user web interface?

1 Accepted Solution

Accepted Solutions

Rob Huffman
Hall of Fame
Hall of Fame

Hi Taylor,

The Speed Dials that are configured by the User via ccmuser are associated with spare Line Buttons (if any are available)and the remainder are accessed via the AbbrDial Softkey (Abbreviated Dial) In this test scenario the 7961 has a Button Template called 3-Line 3-Speeddial so the first 3 that are setup via ccmuser take Line Button 4,5 and 6. The remainder are accessed by keeping the Handset On-Hook, dialing the applicable Speed Dial Code (for example 15 followed by pressing the AbbrDial Softkey) the number programmed against Speed Dial 15 will then be called;

The following options are available for SEP00170EEE2F88 (Test Q335):

Forward all calls to a different number

Add/Update your Speed Dials

Configure your Cisco IP Phone Services

Configure your Cisco Personal Address Book

Change the Message Waiting Lamp policy for your phone

Change the Ring Settings for your phone

Change the Locale for this phone

Change the Locale for these web pages

Change your Password

Change your PIN

Add/Update Your Speed Dials

Configure the Speed Dial Buttons for your Cisco 7961 (SEP00170EEE2F88)

Use this page to enter the phone numbers you want associated with each of your Speed Dial buttons. When you are done, click Update.

Hope this helps!

Rob

View solution in original post

1 Reply 1

Rob Huffman
Hall of Fame
Hall of Fame

Hi Taylor,

The Speed Dials that are configured by the User via ccmuser are associated with spare Line Buttons (if any are available)and the remainder are accessed via the AbbrDial Softkey (Abbreviated Dial) In this test scenario the 7961 has a Button Template called 3-Line 3-Speeddial so the first 3 that are setup via ccmuser take Line Button 4,5 and 6. The remainder are accessed by keeping the Handset On-Hook, dialing the applicable Speed Dial Code (for example 15 followed by pressing the AbbrDial Softkey) the number programmed against Speed Dial 15 will then be called;

The following options are available for SEP00170EEE2F88 (Test Q335):

Forward all calls to a different number

Add/Update your Speed Dials

Configure your Cisco IP Phone Services

Configure your Cisco Personal Address Book

Change the Message Waiting Lamp policy for your phone

Change the Ring Settings for your phone

Change the Locale for this phone

Change the Locale for these web pages

Change your Password

Change your PIN

Add/Update Your Speed Dials

Configure the Speed Dial Buttons for your Cisco 7961 (SEP00170EEE2F88)

Use this page to enter the phone numbers you want associated with each of your Speed Dial buttons. When you are done, click Update.

Hope this helps!

Rob

Getting Started

Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: