SRST Configuration

[Mubarak ali Ali]

Dear All ,

We had a new Voice Gatway router C3945-CME-SRST/K9 for our new branch ,I did basic configuration like configuring Gatway ,configuring Dial Peer .

can any one provide me the steps for Configuring Voice Gateway .

Thanks.,

Mubarak Ali

[Joseph Martini]

I'm not sure of the question here.  If you've done the basic configuration as an H323 gateway by configuring your dial-peers your gateway configuration should be fairly complete.  For SRST you have two options, telephony-service (CME for SRST) or callmanager-fallback.  Using telephony-service provides more options than callmanager-fallback.  If you have a CUCM server you would need to set the SRST reference on the device pool so that your phones know where to try and connect should the CUCM server be unavailable.

[Jaime Valencia]

There are plenty of guides on CCO for SRST, CME, H323 and SIP. Just search one of those keywords + configuration.

You can try to review them and then come back if you have questions, but please be specific about what assistance you need.

HTH

java

if this helps, please rate

www.cisco.com/go/pdihelpdesk