cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
657
Views
0
Helpful
1
Replies

SRST incoming call to FXO fails

habouzyad
Level 1
Level 1

hi all,

i mu using cisco 2911  as SRST. this VG is connected to the FXO .

i have a problem for the external incoming call  on SRST mode :  the external incoming call ring one time and after that the call is connected , but with silent.

i m using this configuration for the fxo port:

!

voice-port 0/1/1

supervisory disconnect dualtone mid-call

no battery-reversal

no vad

no comfort-noise

timeouts call-disconnect 1

timeouts ringing 5

timeouts wait-release 1

timing hookflash-out 50

connection plar 2002

the 2002 extension is an cisco 8961

Please could someone help

thanks in advance

1 Reply 1

acampbell
VIP Alumni
VIP Alumni

Hi,

Can you provide the full confg from the router.

show run

Regards,
Alex.
Please rate useful posts.

Regards, Alex. Please rate useful posts.
Getting Started

Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: