cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
Announcements
362
Views
0
Helpful
6
Replies
BethanyTerry
Beginner

SRST Lines Don't Register in Call Manager

I've replaced a 2811 router with a 2911 router, and now the SRST lines don't register in Call Manager (v10.6). I've verified that I have the correct voice ports configured and all of the other commands seem to be correct (I have done this before, copying and pasting from other routers). Other than checking that I have the correct commands in the router config and when adding the analog lines in Call Manager, what am I missing? The router IOS is 15.2(4)M6a, which I have on other 2911 routers and their SRST lines have registered to the Call Manager just fine. This router is new, I haven't deployed it before. Anything else I could be missing? -Beth

6 REPLIES 6
Jaime Valencia
Hall of Fame Cisco Employee

OK, so phones are not going back to CUCM after going into SRST?

HTH

java

if this helps, please rate