SRST mode: internal calls NOK => "No matching outgoing dial-peer"

[JulienCAROFF87492]

Hi All,

I am in SRST mode, my 2 phones are correctly registered on VoIP GW /Routr(ISR4331) but I get following error from ISR4331: No matching outgoing dial-peer

DN are 60401 & 60402(correctly SIP registered)

Below my config

FIX1-VPN-RTR#sh dial-peer voice summary
dial-peer hunt 0
AD PRE PASS SESS-SER-GRP\ OUT
TAG TYPE MIN OPER PREFIX DEST-PATTERN FER THRU SESS-TARGET STAT PORT KEEPALIVE VRF
20001 pots up down 0 50/0/1 NA
20002 pots up down 0 50/0/2 NA
20003 pots up down 0 50/0/3 NA
40002 voip up up 60401$ 0 syst ipv4:33.129.0.2:5420 NA
40001 voip up up 60402$ 0 syst ipv4:33.129.0.9:4266 NA
4 voip up down 0 syst NA
For server-grp details please execute command:show voice class server-group <tag_id>
To see complete session target for ipv6 use 'sh running-config | section dial-peer <tag>

Could it be this $ at the end of dest-pattern?

Thx in advance

Julien

[Flo.Matalis]

When you were on SRST, what number did you try to call?

You may try issuing this command to check if what outgoing dial-peer will it be using:
show dialplan number <dialednumber> | i Peer

[JulienCAROFF87492]

60401 calls 60402 and reverse