02-16-2020 07:22 PM
Hi Guys.
We have the Cisco 4451 that we want to convert from SRST Mode to CME. Please if some one can tell us the commands.
The licences details is as follows:
If you require further assistance please contact us by sending email to
export@cisco.com.
Suite License Information for Module:'esg'
--------------------------------------------------------------------------------
Suite Suite Current Type Suite Next reboot
--------------------------------------------------------------------------------
FoundationSuiteK9 None None None
securityk9
appxk9
AdvUCSuiteK9 None None None
uck9
cme-srst
cube
Technology Package License Information:
-----------------------------------------------------------------
Technology Technology-package Technology-package
Current Type Next reboot
------------------------------------------------------------------
appxk9 appxk9 Permanent appxk9
uck9 uck9 Permanent uck9
securityk9 securityk9 Permanent securityk9
ipbase ipbasek9 Permanent ipbasek9
show voice register global
CONFIG [Version=12.3]
========================
Version 12.3
Mode is srst
Max-pool is 0
Max-dn is 0
Outbound-proxy is enabled and will use global configured value
Security Policy: DEVICE-DEFAULT
Allow-hash-in-dn is disabled
Forced Authorization Code Refer is enabled
timeout interdigit 0
timeout transfer recall 0
network-locale[0] US (This is the default network locale for this box)
network-locale[1] US
network-locale[2] US
network-locale[3] US
network-locale[4] US
user-locale[0] US (This is the default user locale for this box)
user-locale[1] US
user-locale[2] US
user-locale[3] US
user-locale[4] US
MWI unsolicited notify is disabled
Active registrations : 0
Total SIP phones registered: 0
Total Registration Statistics
Registration requests : 0
Registration success : 0
Registration failed : 0
unRegister requests : 0
unRegister success : 0
unRegister failed : 0
Auto-Register requests : 0
Attempts to register
after last unregister : 0
Last register request time :
Last unregister request time :
Register success time :
Unregister success time :
02-16-2020 08:56 PM
Just remove the srst configuration and configure CME, refer to the CME admin guide for configuration.
02-16-2020 08:57 PM - edited 02-16-2020 08:59 PM
Hi,
It seems you have all the required licenses. You need to do some work to make it happen which includes on a high level:
1) Changing the mode in voice register global and telephony service from srst to cme
2) For SIP Phones:
- Confgure Voice Register Pool and Voice Register DN manually for all the phones you have. You need to populate this information
3) For SCCP Phones:
- configure ephone-dn and ephone for all the phones you have
You can change TFTP server for some phones manually to CME Router to test. once suceed, change the Option 150 for the Voice Vlan DHCP Scope.
Refer to the configuration guide for cucme for detailed steps
Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: