Dear Experts,
I am wondering does SRST Version 8.0 on VG3945 IOS Version 15.1(1)T2 does it support 99XX sip phones on srst as per the sh call-manager-fallback the phone types 99XX are not included in the below list.
3945#sh call-manager-fallback
CONFIG (Version=8.0)
=====================
Version 8.0
Max phoneload sccp version 17
Max dspfarm sccp version 18
For on-line documentation please see:
http://www.cisco.com/en/US/products/sw/voicesw/ps4625/tsd_products_suppo...
ip source-address 10.10.5.50 port 2000
ip qos dscp:
ef (the MS 6 bits, 46, in ToS, 0xB8) for media
cs3 (the MS 6 bits, 24, in ToS, 0x60) for signal
af41 (the MS 6 bits, 34, in ToS, 0x88) for video
default (the MS 6 bits, 0, in ToS, 0x0) for serviceservice directed-pickup
max-ephones 1500
max-dn 2500
max-conferences 8 gain -6
dspfarm units 0
dspfarm transcode sessions 0
huntstop
no huntstop channel
huntstop channel 0
cnf-file location: system:
cnf-file option: PER-PHONE-TYPE
network-locale[0] US (This is the default network locale for this box)
network-locale[1] US
network-locale[2] US
network-locale[3] US
network-locale[4] US
user-locale[0] US (This is the default user locale for this box)
user-locale[1] US
user-locale[2] US
user-locale[3] US
user-locale[4] US
srst mode auto-provision is OFF
srst ephone template is 0
srst dn template is 0
srst dn line-mode single
time-format 12
date-format dd-mm-yy
timezone 31 Saudi Arabia Standard Time
secondary-dialtone 9
call-forward noan 37851 timeout 60
call-forward pattern .T
transfer-pattern .T
keepalive 30 auxiliary 30
timeout interdigit 10
timeout busy 10
timeout ringing 180
timeout transfer-recall 0
timeout ringin-callerid 8
timeout night-service-bell 12
caller-id name-only: enable
system message primary SRST MODE
system message secondary SRST MODE
Limit number of DNs per phone:
12SP: 76
7902: 76
7905: 76
7906: 76
7910: 76
7911: 76
7912: 76
7920: 76
7921: 76
7925: 76
7931: 76
7935: 76
7936: 76
7937: 76
7940: 76
7941: 76
7941GE: 76
7942: 76
7945: 76
7960: 76
7961: 76
7961GE: 76
7962: 76
7965: 76
7970: 76
7971: 76
7975: 76
7985: 76
anl: 76
ata: 76
bri: 76
CIPC: 76
vgc-phone: 76
IP-STE: 76
6921: 76
6941: 76
6961: 76
Log (table parameters):
max-size: 150
retain-timer: 15
transfer-system full-consult
transfer-digit-collect new-call
local directory service: enabled.
Extension-assigner tag-type ephone-tag.
configuration for SIP Phones:
!
voice service voip
!
registrar server
!
voice register global
max-dn 100
max-pool 42
!
voice register dn 1
number 23000
!
voice register dn 2
number 23001
!
voice register dn 3
number 23002
!
voice register pool 1
id network 10.10.6.20 mask 255.255.255.0
dtmf-relay h245-alphanumeric
codec g711alaw
!
voice register pool 2
id network 10.10.6.20 mask 255.255.255.0
dtmf-relay h245-alphanumeric
codec g711alaw
!
voice register pool 3
id network 10.10.6.20 mask 255.255.255.0
dtmf-relay h245-alphanumeric
codec g711alaw
does this configuration correct if anything else is need please add to it...
Thanks in advance.