cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
Announcements

Cisco Community Designated VIP Class of 2020

275
Views
0
Helpful
5
Replies
Contributor

Suppress Ringback Tone for Outgoing Calls

Hello

Usually it's the other way round, but our customer likes to suppress the ringback tone on outgoing calls (outbound dialing for callcenter agents). Is it possible to configure the H.323 (connected to a CUCM) so that the voice path is not cut through before the connect is received?

Any inputs are greatly appreciated.

Regards

Stefan

PS: ISDN Q931 Debug of the Alert

162844: Jul 20 14:45:36 CEST: ISDN BR0/0/0 Q931: RX <- ALERTING pd = 8 callref = 0xB3

Progress Ind i = 0x8288 - In-band info or appropriate now available

1 ACCEPTED SOLUTION

Accepted Solutions

Re: Suppress Ringback Tone for Outgoing Calls

Try this one:

dial-peer voice X pots

progress_ind alert strip 8

It's hidden, and may do what you're looking for.

-nick

View solution in original post

5 REPLIES 5

Re: Suppress Ringback Tone for Outgoing Calls

Try using the "progress_ind {setup | connect | progress} {PI | disable}" dial-peer configuration command.

Contributor

Re: Suppress Ringback Tone for Outgoing Calls

Hi

Thanks for the reply

I have already tried the "progress_ind disable" command. Seems like those commands only help if you like to force the ringback tone.

Regards

Stefan

Re: Suppress Ringback Tone for Outgoing Calls

Try this one:

dial-peer voice X pots

progress_ind alert strip 8

It's hidden, and may do what you're looking for.

-nick

View solution in original post

Contributor

Re: Suppress Ringback Tone for Outgoing Calls

Hi Nick

Exactly what I was looking for. Many thanks for your help

Have a nice day

Regards

Stefan

Highlighted
Enthusiast

Re: Suppress Ringback Tone for Outgoing Calls

Thanks Stefan

This is the solution that we want.

great work.

Roland

CreatePlease to create content
Content for Community-Ad
FusionCharts will render here