.Feb 5 09:56:44.310 utc: %SWITCH_QOS_TB-5-TRUST_DEVICE_LOST: cisco-phone no longer detected on port Gi4/34, operational port trust state is now untrusted.
ios - cat4500e-universalk9.SPA.03.05.02.E.152-1.E2.bin
cisco WS-C4506-E (MPC8572) processor (revision 6) with 2097152K bytes of physical memory.
MPC8572 CPU at 1.5GHz, Supervisor 7L-E
Last reset from PowerUp
2 Virtual Ethernet interfaces
244 Gigabit Ethernet interfaces
2 Ten Gigabit Ethernet interfaces
511K bytes of non-volatile configuration memory.
Configuration register is 0x2101
description *** 35-A ***
switchport access vlan 50
switchport mode access
switchport voice vlan 60
switchport port-security maximum 2
switchport port-security mac-address sticky
switchport port-security mac-address sticky 1803.73da.7381
switchport port-security mac-address sticky 189c.5daa.71fd vlan voice
auto qos voip cisco-phone
storm-control broadcast level 20.00
qos trust device cisco-phone
service-policy input AutoQos-4.0-Cisco-Phone-Input-Policy
service-policy output AutoQos-4.0-Output-Policy
Please anybody can help on this -
suggest if any configuration issue is there.
If this was working phone and you see suddenly developed the issue on that port. Try to swap with new patch lead and try.
if this is new one you trying to configure, post the QOS configuration from switch.
another thing look thing sticky MAC address matches with the device other note.(may be not related to this issue).
it showed ios is stable.
Another thing: Post the complete output to the command "sh interface Gi4/34".