I need to know also the answer of this question
Does that need a Single Screen licence or Multi Screen?
But I remember that I have configured sx20 with cucm 8.6 without any need for TP single screen license as it consume some DLUs only
May be this lic is required starting cucm 9
The license rule needs to be followed even in 8. Yes it takes DLU because user licensing isn't enforced
With 9 there is only one license called TP licensing that's all you need no more hassles with single multi etc
Thanks for your reply
So this one " LIC-TP-SGL-SRN " is now replaced with tp licensing ?
I found this license LIC-CTS-MAN-10= also available for 50 and 100 units
Please advise what is the tp PN and I think I should use 2 for two sx20 .. right ?
sorry I got confused
Plz write the PN required for two sx20 with cucm 9
And If I install these 2 sx20 point to point, Do I need also this license
Thanks again Srini
for two sx20 with cucm 9.x you need:
|R-UCL-UCM-LIC-K9||Top Level SKU For 9.x/10.x User License - eDelivery||1|
|LIC-TP-9X-ROOM||Telepresence Room Based Endpoint Single or Multi-Screen||2|
|CUCM-VERS-9.X||CUCM Software Version 9.X||1|
|UCM-PAK||UCM 9X/10X PAK||1|