SX20 on CUCM 8.x 7.x

[manuel-mendez]

Hello,

Does anybody know if we can register the SX20 as a 3rd party SIP endpoint in older versions of CUCM (prior to 8.6)? Otherwise, I guess my options are upgrading to 8.6 or get a VCS.

Thanks,

Manuel

[Hythim Ali El Hadad]

I need to know also the answer of this question

Does that need a Single Screen licence or Multi Screen?

But I remember that I have configured sx20 with cucm 8.6 without any need for TP single screen license as it consume some DLUs only

May be this lic is required starting cucm 9

[skilambi]

The license rule needs to be followed even in 8. Yes it takes DLU because user licensing isn't enforced

With 9 there is only one license called TP licensing that's all you need no more hassles with single multi etc

Thanks

Srini

[Hythim Ali El Hadad]

Hi Srini,

Thanks for your reply

So this one " LIC-TP-SGL-SRN " is now replaced with tp licensing ?

I found this license LIC-CTS-MAN-10=  also available for 50 and 100 units

Please advise what is the tp PN and I think I should use 2 for two sx20 .. right ?

Thanks again

[skilambi]

Yes single screen with 8.

No cts man is needed that's the old scheduling product, TMS is the replacement product

Thanks

Srini

[Hythim Ali El Hadad]

sorry I got confused

Plz write the PN required for two sx20 with cucm 9

And If I install these 2 sx20 point to point, Do I need also this license

Thanks again Srini

[skilambi]

Look under l-cucm-usr-LIC-add an inside that you will see the licensing

Yes for each unit you need to buy the license

Thanks

Srini

[cbrasolin]

Hi,

for two sx20 with cucm 9.x you need:

Item Name	Description	Quantity
R-UCL-UCM-LIC-K9	Top Level SKU For 9.x/10.x User License - eDelivery	1
LIC-TP-9X-ROOM	Telepresence Room Based Endpoint Single or Multi-Screen	2
CUCM-VERS-9.X	CUCM  Software Version 9.X	1
UCM-PAK	UCM 9X/10X PAK	1

Regards,