Telephony Service & Voice Register Global Interoperability

[mazloumi.arash]

Hello

in our company we have 20 sccp phone and 12 sip phone all of them registered in CME 8.6

so telephony service and voice register global are working with each other

but we have one problem, i cant define shared line between sip and sccp phone?

i there any solution to solve our problem?

[Rob Huffman · Accepted solution]

Hi Arash,

This is not supported until the relase of CME 9.x

Mixed Shared Lines

Cisco Unified CME 9.0 and later versions support the mixed Cisco Unified  SIP/SCCP shared line. This feature allows Cisco Unified SIP and SCCP IP  phones to share a common directory number.

The mixed shared line supports up to 16 calls, depending on the  configuration in Cisco Unified CME, which rejects any new call that  exceeds the configured limit.

For configuration information, see the "SCCP: Creating Directory Numbers" section and the "SIP: Creating Directory Numbers" section.

http://www.cisco.com/en/US/docs/voice_ip_comm/cucme/admin/configuration/guide/cmebasic.html#wp1081127

Cheers!

Rob

"Always movin' ahead and never lookin' back" - Springsteen

[Ayodeji Okanlawon]

+ 5 Great Rob! Infact greates Rob Huffman. How do you always dig out these features! You are just brilliant.

Please rate all useful posts

"'Nature is too thin a screen, the glory of the omnipresent God bursts through it everywhere"-Ralph Waldo Emerson

[mazloumi.arash]

Dear Rob

Thanks for your great reply

So unfortunately we cant use this feature because we have 2821 router and CME 9.0 not supported for this platform.