cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
470
Views
0
Helpful
1
Replies

Telnet to multiple subnets

monasir
Level 1
Level 1

Hi everybody,

Can someone please help me what the best way is to telnet to each switch/router whit a different subnet

I do not have solid routing/switching background.

I know how to telnet to one subnet ( 10.10.101.1 ) example i make a bridge to my networking connections and manually ad a ip adress that resides

in the same subnet

But i like to know how to telnet to a network whit 2 different subnets.

I'm adding a table to show you how the ip adressing scheme looks like.

Scenario.

I have a cisco voice home lab consist of the following:

1x2811

3x2801

1x3750

servers:

CUCM (Pub/Sub)

CUPS

CUC

CUCCX

Win2k3 AD

Any advise will help

Thanks!

1 Reply 1

Chris Deren
Hall of Fame
Hall of Fame

To telenet device on another network you need network connectivity to it. So your layer 3 communication has to be in place eiher via static routes for a very simple network or a routing protocol such as EIGRP, OSPF, RIP, etc.

Chris

Getting Started

Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: