Hello,
I need to use prefixes .# (10#) in my C3945 (15.1 rel)
Unfortunately Cisco is generating r-uri/To like 10%23
In other way:
1) incoming INVITE
INVITE sip:10#4444444@10.10.10.10:5060 SIP/2.0.
To: <sip:10#4444444@10.10.10.10>.
2) outgoing INVITE
INVITE sip:10%234444444@89.31.240.14:5060 SIP/2.0.
To: <sip:10%234444444@89.31.240.14>.
Changing default # dial-peer terminator does not do the trick.
Does anyone of you faced similiar problem?
Is there any workaround?
Thanks in advance.