Hi,
I've configured profile and defined only g729r8 codec
But i can see that g729ab is using.
How to get rid of g729 codec with vad?
dspfarm profile 22 transcode
codec g711alaw
codec g711ulaw
codec g729r8
maximum sessions 6
associate application SCCP
Transcoding Oper State: ACTIVE - Cause Code: NONE
Active Call Manager: 10.25.25.11, Port Number: 2000
TCP Link Status: CONNECTED, Profile Identifier: 22
Reported Max Streams: 12, Reported Max OOS Streams: 0
Supported Codec: g711alaw, Maximum Packetization Period: 30
Supported Codec: g711ulaw, Maximum Packetization Period: 30
Supported Codec: g729r8, Maximum Packetization Period: 60
Supported Codec: rfc2833 dtmf, Maximum Packetization Period: 30
Supported Codec: rfc2833 pass-thru, Maximum Packetization Period: 30
Supported Codec: inband-dtmf to rfc2833 conversion, Maximum Packetization Period: 30
Klngrd-GT-VGW-c2911#sh sccp con
sess_id conn_id stype mode codec sport rport ripaddr conn_id_tx
86083968 103096539 xcode sendrecv g711u 23650 30318 172.30.0.73
86083968 103096538 xcode sendrecv g729ab 29280 25202 10.25.0.5
Total number of active session(s) 1, and connection(s) 2
