05-27-2011 03:05 AM - edited 03-16-2019 05:10 AM
Hi all,
Could you please share, in which all cases a transcoder resource is required ?
I know only about the two instances as below.
1) G729 call from CUCM to Unity connection, as Unity connection only supports G.711
2) CUBE environment,
I would appreciate your comments on the above.
Regards
05-27-2011 05:14 AM
You'll need a transcoder in any situation in which you have a codec mismatch and one side cannot negotiate usable on the other side. Other examples include a CUE Module with G729 across the WAN, UCCX with G729 across the WAN, etc.
05-27-2011 10:27 AM
HI
You will need a transcoder in cases whereever there are two call legs of different Codecs and Compression and Call Manager looks for a device to patch these two call legs.
Transcoder is a precious resource and is to be used Judiciously.
For more information, refernce.
http://docstore.mik.ua/univercd/cc/td/doc/product/voice/its/cmeadm/cmetrnsc.htm
Thanks
Tapan
Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: