cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
1133
Views
0
Helpful
3
Replies

Translation Pattern to hide translated called number

curtishu19
Level 1
Level 1

Hi,

Just wondering is there a way to hide called number in a translation pattern, for example, translation patter DN is 1111, and called party number is 2222, I would like when user dial 1111 from internal, it should only show 1111 on the phone, hiding the number 2222.

Thanks,

3 Replies 3

Ayodeji Okanlawon
VIP Alumni
VIP Alumni

Curtis,

Not sure you can do that...If you witheld the called number, how will the call be routed?

Please rate all useful posts

"'Nature is too thin a screen, the glory of the omnipresent God bursts through it everywhere"-Ralph Waldo Emerson

Please rate all useful posts

Gordon Ross
Level 9
Level 9

The only way I can think of doing this, is to go through some external system and making sure that the external system acts really dumb (e.g. no anti-trombone)

GTG

Please rate all helpful posts.

You could use the external phone number mask and assigned any number needed, say a main number to a caller center, where that number shows up on callers display.  This works for external calling but the actual number assigned to the phone will still be displayed internally. Masking the number could also be a problem if a user dials 911 so be careful.

Jim