10-03-2016 12:37 AM - edited 03-17-2019 08:15 AM
Hi guys! I'm stuck.
I try add prefix 92 to my phone-dn with number 2303 by translation-profile
But it's not working.
I try call to number 2304 in this cisco (for exampe 2404) - but my callied number not change.... as 9222404
I want to do 2 route - based on source number: one sip provider for 23xx, second provider - for 24xx
Is it possible decide inside one router ? Or i need push call outside ?
CME 3925 Version 15.4(3)M5
ephone-dn 3 dual-line
number 2303
translation-profile outgoing out3
voice translation-profile out3
translate called 3
voice translation-rule 3
rule 1 /^\(.*\)/ /92\1/
Solved! Go to Solution.
10-03-2016 12:24 PM
Hi,
Did you change translation-profile outgoing to translation-profile incoming as suggested by Aseem before? Please note that an outgoing call leg from IP phone will hit inbound dial peer from router point of view. Changing translation profile direction should work for you.
- Vivek
10-03-2016 01:43 AM
Hi,
Do you want to prefix 92 to calling number or called number? If you want to prefix 92 to calling number on the ephone-dn 2303, then can you try applying the translation-profile in incoming direction on the ephone-dn?
ephone-dn 3 dual-line
number 2303
translation-profile incoming out3
voice translation-profile out3
translate calling 3
voice translation-rule 3
rule 1 /^\(.*\)/ /92\1/
Aseem
10-03-2016 01:53 AM
Hi Aseem, oh, i'm wrong.
Of course, called number.
I try call to number 2304 in this cisco (for exampe 2404) - but my callied number not change.... as 9222404
10-03-2016 12:24 PM
Hi,
Did you change translation-profile outgoing to translation-profile incoming as suggested by Aseem before? Please note that an outgoing call leg from IP phone will hit inbound dial peer from router point of view. Changing translation profile direction should work for you.
- Vivek
10-03-2016 12:41 PM
Thank you!
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide