New VoIP deployment. 100+ phones, VG-224 with roughly 12-14 fax machines. Call Manager 7. VG-224 is at the same location as 2811 Gateway servicing the PRI. All fax calls come in and leave the PRI. T.38 between 2811 and VG-224.
Had some issues with T1 timing that was resolved with Cisco TAC (we missed a timing config on the 2811). Fax transmission has stabilized. However, speeds are still in the tank. A 24 page document took almost 40 minutes in once case. Any thoughts about what we might be missing? Are there any tips or tricks some of you who have been through this might be able to share with us?
1) Check E1/t1s for clock slips (guess this is what TAC did for you)
2) Disable 'fancy' things on fax machines - particularly ECM or high speed functions. ECM means lots of retries (slowdowns) and potential failures, high speeds generally give bad results. ECM can usually be disabled from the fax menu maze.
3) Check for any packet loss on the IP path, and remediate. Use CDR/CMR logging on CCM to see whether you are experiencing any loss, then try to work out where this occurs if it does.
4) Avoid faxes, send email
Please rate helpful posts...
Please remember to rate helpful posts to identify useful responses, and mark 'Answered' if appropriate!
MARS Emergency Alerts helps an organization to create, distribute and manage enterprise wide notification to all employees in the enterprise in a systematic and efficient manner.The application allows alerts to be broadcasted to Cisco IP phones by the app...
The acronym "STUN" stands for two definitions with two different meanings as follows:
STUN - Simple Traversal of User Datagram Protocol (UDP) ---> RFC 3489 published in 2003 - works only with static NAT to establish a direct connectivity between...
Inbound CSS and Rerouting CSS with Cisco Unity Connection Transfer rules:Release to Switch: this type of transfer uses the SIP Refer method to reroute the call to the specified extension, it is sent in dialog in other words in the existing SIP conversatio...
As mentioned previously in my previous article and following the same idea of certificate pinning in Cisco Meeting Server, to demonstrate this concept added since version 3.0. I used two different CA to sign :1-The WebBridge certificate with CA's certific...