cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
734
Views
0
Helpful
3
Replies

TrnsfVM to external CUE with VPIM

daryls
Level 4
Level 4

Scenario is this

SiteA

SiteB

External/Internal call into SiteA to general number. User needs to transfer call to SiteB users Voicemail using the TrsnfVM softkey in CME.

VPIM networking is configured between SiteA and SiteB

users are configured as remote users. Callers receive their is no mailbox for that extension on this system.

Regular voicemail functions work fine.

Config below

network location id 111

email domain 10.1.1.253

name SiteA

voicemail phone-prefix 1

voicemail extension-length 4

voicemail vpim-encoding G711ulaw

voicemail spoken-name

end location

remote username wwww location 222 create

remote username wwww phonenumber "2113"

network location id 222

email domain 10.1.2.253

name SiteB

voicemail phone-prefix 2

voicemail extension-length 4

voicemail vpim-encoding G711ulaw

voicemail spoken-name

end location

remote username vvvvvv location 111 create

remote username vvvvvv phonenumber "1128"

1 Accepted Solution

Accepted Solutions

Hi,

I see you are missing these:

ip domain-name

ip name-server

you must have dns for VPIM to work

Regards

Haitham

View solution in original post

3 Replies 3

Hi,

I see you are missing these:

ip domain-name

ip name-server

you must have dns for VPIM to work

Regards

Haitham

daryls
Level 4
Level 4

name-server is configured. For the email domain, using the IP address.

The issue is the call comes into cue from the traces as the extension of the remote users and CUE doesn't know to route it to the remote mailbox using the "TrnsfVM" softkey

Hi,

Try to test it using FAC and check your traces

If not work, Then think for some limitation at this point

Regards

Haitham

Getting Started

Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: