Turning on packet count figures for access lists used in class maps on a Cisco ISR4451-X/K9

[rcsmith]

class-map match-any police_traffic_rtr-01 match access-group name police_rtr-01 ip access-list extended police_rtr-01 permit ip host 10.20.20.100 10.10.10.0 0.0.0.255 permit ip host 192.168.5.76 10.10.10.0 0.0.0.255 permit ip host 192.168.1.79 10.10.10.0 0.0.0.255 permit ip host 192.168.1.19 10.10.10.0 0.0.0.255 permit ip host 192.168.1.159 10.10.10.0 0.0.0.255 platform qos match-statistics per-filter

[Dennis Mink]

---

@rcsmith wrote:

class-map match-any police_traffic_rtr-01 match access-group name police_rtr-01 ip access-list extended police_rtr-01 permit ip host 10.20.20.100 10.10.10.0 0.0.0.255 permit ip host 192.168.5.76 10.10.10.0 0.0.0.255 permit ip host 192.168.1.79 10.10.10.0 0.0.0.255 permit ip host 192.168.1.19 10.10.10.0 0.0.0.255 permit ip host 192.168.1.159 10.10.10.0 0.0.0.255 platform qos match-statistics per-filter

---

Whats your question Smitty?

[R0g22]

See if "show ip access-list" shows you what you want.