cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
647
Views
0
Helpful
1
Replies

Twilio SIP Trunking with CUBE

Hello all,

I am working on a lab setup using Twilio SIP trunk, Cisco 2821 with IOS: c2800nm-ipvoicek9-mz.151-4.M3.bin, and CUCM (System version: 9.1.2.11900-12).

I am trying to test incoming calls. The call is successfully sent to CUCM, I can hear the ringing tone, but when the call is answered, it gets disconnected (Picture attached)

I have also attached the

debug ccsip messages

and

debug ccsip all

output.

1 Accepted Solution

Accepted Solutions

The problem occurred, because the CUBE was sitting behind a NAT firewall

https://www.twilio.com/docs/sip-trunking/troubleshooting#problem30

 

Changing the SIP headers fixed the issue. 

 

View solution in original post

1 Reply 1

The problem occurred, because the CUBE was sitting behind a NAT firewall

https://www.twilio.com/docs/sip-trunking/troubleshooting#problem30

 

Changing the SIP headers fixed the issue. 

 

Getting Started

Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: