cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
464
Views
0
Helpful
2
Replies
Highlighted
Beginner

Type 5 CLID support with Cisco 3845

Hi -

I have a requirement to check if the Cisco 3845 VG with E1 trunks connected to the carrier can support Type 5 CLID presentation. Was trying to get something on the web with no luck. Has anybody done this before ? If so , request you to let me know if there`s anything specific that we have to configure at the gateway level. Could really appreciate your help on this.

Thanks in Advance,

Raj

Everyone's tags (3)
2 REPLIES 2
Hall of Fame Master

Type 5 CLID support with Cisco 3845

What is a type 5 CLID?

Do you have PRI or E1 R2 ?

Are you using H.323 or MGCP?

You need to be more specific when exposing problems.

Beginner

Type 5 CLID support with Cisco 3845

Thanks for your swift response.

Below are the responses to your queries :

Type 5 CLI :

Presentation numbers that identify separate groups of callers behind a private network switch wishing to send different outgoing CLIs. A typical scenario is a call centre making calls on behalf of more than one client. Type 5 presentation numbers are generated by the user's equipment. Subscribers will need to enter into a similar contractual commitment with their network providers as for type 1 presentation numbers - that they are entitled to use the numbers they have selected.

I`m using E1 PRI terminating on a Cisco 3845 configured as SIP gateway with CUCM 7.x.

Raj

CreatePlease to create content
Content for Community-Ad
July's Community Spotlight Awards