Hi there I have UC 540 with sccp phones and SIP trunk configured. And that is operational. I configured in addition SIP accounts for teleworkers that are suppose to connect via IPsec tunnel to the office. Also these users arte able to connect to the office and call other via extensions.
Now there is first pproblem.
1.When I call from remote SIP phone to local LAN skinny phone I can see just extension number (even though I created label nuser, and Name user) how to make this work ? When sip call skinny and both are inside LAN I can see callerd ID as user on a skinny screen, and when same Sip user (from LAN) calls remote user it is just extension number.
And right after that I have second one:
2. When skinny phone (in LAN) calls any SIP account (remote or in LAN) I can see username defined for skinny phone, but number that appears is not local extension but main SIP trunk number !
Please can someone give me some advice . Thanks
this is SIP configuration:
UC540#sh run | beg voice register
voice register global
mode cme
source-address 192.168.1.200 port 5060
max-dn 15
max-pool 15
authenticate register
create profile sync 0033494746986118
!
voice register dn 1
number 81
allow watch
name USER1 Remote
label USER1 Remote
!
voice register dn 2
number 86
allow watch
name USER2 Remote
label USER2 Remote
!
voice register dn 3
number 82
allow watch
name USER3 Remote
label USER3 Remote
!
voice register dialplan 1
type 7940-7960-others
pattern 1 2.
!
voice register pool 1
id mac macnumber
number 1 dn 1
dialplan 1
username USER1 password 1234
codec g711alaw
!
voice register pool 2
id mac macnumber
number 1 dn 2
dialplan 1
username USER2 password 1234
codec g711alaw
!
voice register pool 3
id mac macnumber
number 1 dn 3
dialplan 1
username USER3 password 1234
codec g711alaw
!