Hello everyone,
I am migrating from an old full blow unity/call manager to a uc560.
FACTS:
layer 3 catalyst switch: vlan 1, (192.168.10.0) for data vlan 101 for voice (192.168.11.0)
UC560: vlan 1 (192.168.10.0) for data... vlan 101 for voice (192.168.11.0)
work,
Phones: all running on the 192.168.11.0 obviously.
SUMMARY:
SO, when i plug the UC smart port in dektop/phone mode into one of the ports on the layer 3 switches the uc and any plugged in phones are up and working.
THE PROBLEM:
NOW the problem. the 192.168.10.0 network(data network) can NOT ping the 192.168.11.0 voice network. This simply won't work out for some VPN issues that I won't go into. the 10 network must be able to ping the 11 network.
SO the port i plugged the uc into is assigned to vlan101, i removed than assignemend and assigned it 1-101. Still no pinging between the networks..
Can tell me any ideas on what i need to do to ping between networks?
thanks!
