cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
511
Views
0
Helpful
3
Replies
Highlighted
Contributor

UC560 VERSION 8.6 SUPPORT ATA 187 ???

Hi to all

i see many posts related to this issue but , unfortunately i didnt see nay specific answer

Does the UC560 VERSION 8.6 SUPPORT ATA 187?

Do you have any documentation?

If is not supported then what is the plan B to register an analog phone (fax) into UC560

Please rate all useful posts Regards Chrysostomos ""The Most Successful People Are Those Who Are Good At Plan B""
Everyone's tags (7)
1 ACCEPTED SOLUTION

Accepted Solutions
Hall of Fame Master

UC560 VERSION 8.6 SUPPORT ATA 187 ???

At this time, is not officially support, but it might work.

The best way to connect phone or fax is to use the FXS ports on the unit itself.

View solution in original post

3 REPLIES 3
Hall of Fame Master

UC560 VERSION 8.6 SUPPORT ATA 187 ???

At this time, is not officially support, but it might work.

The best way to connect phone or fax is to use the FXS ports on the unit itself.

View solution in original post

Contributor

UC560 VERSION 8.6 SUPPORT ATA 187 ???

Thank you Paolo

Regards

cc

Please rate all useful posts Regards Chrysostomos ""The Most Successful People Are Those Who Are Good At Plan B""
Hall of Fame Master

Re: UC560 VERSION 8.6 SUPPORT ATA 187 ???

You're welcome, thanks for the nice rating and good luck!

CreatePlease to create content
Content for Community-Ad
August's Community Spotlight Awards