UC560 VERSION 8.6 SUPPORT ATA 187 ???

[chrysostomos1980]

Hi to all

i see many posts related to this issue but , unfortunately i didnt see nay specific answer

Does the UC560 VERSION 8.6 SUPPORT ATA 187?

Do you have any documentation?

https://supportforums.cisco.com/docs/DOC-22311

If is not supported then what is the plan B to register an analog phone (fax) into UC560

[paolo bevilacqua · Accepted solution]

At this time, is not officially support, but it might work.

The best way to connect phone or fax is to use the FXS ports on the unit itself.

[chrysostomos1980]

Thank you Paolo

Regards

cc

[paolo bevilacqua]

You're welcome, thanks for the nice rating and good luck!