UC560 with FXS ports that gets useless after some time of use
I've an UC560 with 4 FXS ports built-in.
In 2 of the 4 ports of the UC, I've configured 2 stcapp phones.
After some time of use, these 2 ports became unavailable, so I've to make the command "shut" and "no shut" to return to life these 2 ports. They remain working during some amount of time and became unavailable again, and the solution is the same, "shut" "no shut".
I'm trying to connect a Microsoft Wireless Display Adapter https://www.microsoft.com/accessories/en-us/products/adapters/wireless-display-adapter-2/p3q-00001 for Screen sharing. When the Adapter is connected to the Webex screen, it is recognised...
We are upgrading our UCM cluster from 10.5 to 12.5 what is the preferred method of license manager (Cisco Smart Software Manager) considering the security risksDirect could accessDirect cloud access through and HTTPs proxy -Mediated access through a...
1. IntroductionThe purpose of this document is to consolidate the list of deprecated Cisco IP Phone Models in different versions of Cisco Unified Communications Manager.2. RequirementsBasic knowledge of a Cisco Unified Communications ManagerBasic knowledg...
Message to visitors: this document is work in progress, will update in the coming weeks several times!
MPP 6800 series - DECT Deployment Guide
DECT stands for Digital Enhanced Cordless Telecommunications and is a standard for wireless voice services in bu...
This document describes how to collect CUCM devices reports from using the Command Line Interface (CLI) of the server's operating system (OS).
Contributed by Christian Nuche (cnuche), Cisco DSM Designated Services Manager - Hig...