UC560 with FXS ports that gets useless after some time of use
I've an UC560 with 4 FXS ports built-in.
In 2 of the 4 ports of the UC, I've configured 2 stcapp phones.
After some time of use, these 2 ports became unavailable, so I've to make the command "shut" and "no shut" to return to life these 2 ports. They remain working during some amount of time and became unavailable again, and the solution is the same, "shut" "no shut".
Good afternoon,Strange occurrence happening. We two different agents getting connected to the same caller/customer. We have checked the ext in CUCM, they are different. We have checked the ICM configs, different. We have listened to the call r...
Is there a way in UCCE with using an admin script maybe using the email application in Call Studio to send out an email? I know in UCCX you can send out an email if the script were to fail but is there a way to do it in UCCE? Any help would be great!
Fun lab with Packet Tracer and running Cisco CME with 3 ip phones, 3 laptops, 1 switch, and 1 router. Fun lab with repetition. You will be able to test your phones and laptop for connectivity etc. Solution;see attached CME Packet Tracer L...